Pollution Research
|
| |
Product |
Price |
View |
|
MatrixAir 10.0 FM
SHIPPING $7.99
Keep your office, salon, shop, bowling center, or restaurant smoke-free with our flush/ceiling mount commercial HEPA filter systems!
The 10.0 Flushmount Air Cleaner is designed to drop into a suspended ceiling. It replaces either 1 - 2 x 4 tile or 2 - 2 x 2 tiles from the suspended ceiling. In order to install the PR10.0 flushmount easily the clearance above the suspended ceiling needs to be at least 13" and is recommended that the air cleaner is installed in areas that do not exceed a 13 foot ceiling height. The weight of the system does not rest on the ceiling grids but is secured above the suspended ceiling to a permanent structure such as a joist or beam. All filters on the 10.0 Flushmount are accessible from the louvered door and hinge door on the face of the system. 1 unit recommended for every 1000 square feet.
Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air thats been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants.
Specs:
1200 C.F.M.
All systems carry a lifetime motor/blower warranty
All electrical components and fan motor are UL Listed and CSA Certified. Note: 13" Clearance above drop ceiling required.
Install by removing ceiling tile and dropping unit in. Plug in or hard wire.
Dimensions: Fits in 2 - 2x2 or 1 - 2x4 ceiling tile
46 1/2" L x 23 3/4" W x 12" H
Electrical:
4.2 amps, 120 volts, Two Speed
10 ft power cord, 3 prong grounded plug
Filters: Three Filter System: HEPA, Charcoal, Pre-Filter
1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
12" deep HEPA Filter
Weight:
85 lbs.
CFM:
1200
Cabinet Finish:
White
Installation:
Suspended ceiling
Retail Price: $1,995.00
Our Price: $1,785.95 |
2050.00 |
View |
|
MatrixAir Muscle Machine - Pollution Research
The
Flush/Ceiling Mount HEPA Filter Systems will virtually ELIMINATE tobacco smoke
and most offensive odors from the air.
It is recommended that the
Muscle Machine Air Cleaner be installed in areas that have 7 1/2 to 9 foot ceiling
heights. The Muscle Machine Air Cleaner is equipped with 4 eye bolts installed
16" on center on top of each system for easy installation. The installation
hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging
wire.
Our ceiling mount HEPA Filter
Systems use a powerful variable speed blower to draw the air from smoke-filled
areas. As the air is drawn through the high-efficiency filter media, 95% of
the tobacco smoke particles are removed on each pass. The clean air that is
constantly discharged into the area is refreshing and remarkably free of tobacco
smoke and other contaminants. This is particularly beneficial in lounges and
restaurants, because it reduces the need for segregated smoking areas. Practically
all of the dust, dirt, pollen and other contaminant particles are removed from
the air passing though the air cleaner. Even the microscopic airborne particles
are trapped. Everyone prefers breathing air thats been cleaned of the many
pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen,
spores and fungi count helps reduce the problems caused by these pollutants.
1 unit recommended for every
800 sq. ft.
Dimensions:
23" L x 24" W x 12" H
Electrical:
2.1 amps, 120 volts, Two Speed
7 ft power cord, 3 prong grounded plug
Filters:
1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
12" deep HEPA Filter
Weight:
60 lbs.
CFM:
800
Cabinet Finish:
White, Woodgrain or Black
Installation:
Ceiling or wall mounted |
1272.00 |
View |
|
MatrixAir Mark 10
It is recommended that the Mark 10 Air Cleaner be installed in areas that have 9-10 foot ceiling heights. The Mark 10 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1000 square feet.
1000 C.F.M.
Ceiling or Wall Mount
35-1/2" L x 25-1/2" W x 13" H
Woodgrain or White Finish
Shipping Weight - 100 lbs.
4.2 amps, 120V, Two speed
10 ft. power cord, 3 prong grounded plug
Three Filter System: HEPA, Charcoal, Pre-Filter
All systems carry a lifetime motor/blower warranty
All electrical components and fan motor are UL Listed and CSA Certified.
Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air thats been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants. |
1895.00 |
View |
|
MatrixAir Mark 15
Our extremely attractive, self-contained systems require very low maintenance (approximately 30 seconds per month).
It is recommended that the Mark 15 Air Cleaner be installed in areas that have 10-12 foot ceiling heights. The Mark 15 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 1500 sq. ft.
1500 C.F.M.
Ceiling or Wall Mount
35-1/2" L x 25-1/2" W x 17-1/2" H
Woodgrain or White Finish
Shipping Weight - 125 lbs.
6.2 amps, 120V, Two speed
10 ft. power cord, 3 prong grounded plug
Three Filter System: HEPA, Charcoal, Pre-Filter
All systems carry a lifetime motor/blower warranty
All electrical components and fan motor are UL Listed and CSA Certified.
Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air thats been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants. |
2095.00 |
View |
|
MatrixAir Mark 20
Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner.
It is recommended that the Mark 20 Air Cleaner be installed in areas that have 12 foot ceiling heights or more. The Mark 20 Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire. 1 unit recommended for every 2000 sq. ft.
2000 C.F.M.
Ceiling or Wall Mount
36" L x 25" W x 25" H
Woodgrain or White Finish
Shipping Weight - 167 lbs.
9.0 amps, 120V, Two speed
10 ft. power cord, 3 prong grounded plug
Three Filter System: HEPA, Charcoal, Pre-Filter
All systems carry a lifetime motor/blower warranty
All electrical components and fan motor are UL Listed and CSA Certified.
Our ceiling mount HEPA Filter Systems use a powerful variable speed blower to draw the air from smoke-filled areas. As the air is drawn through the high-efficiency filter media, 95% of the tobacco smoke particles are removed on each pass. The clean air that is constantly discharged into the area is refreshing and remarkably free of tobacco smoke and other contaminants. This is particularly beneficial in lounges and restaurants, because it reduces the need for segregated smoking areas. Practically all of the dust, dirt, pollen and other contaminant particles are removed from the air passing though the air cleaner. Even the microscopic airborne particles are trapped. Everyone prefers breathing air thats been cleaned of the many pollutants that can cause discomfort and stuffiness. Plus, lowering the pollen, spores and fungi count helps reduce the problems caused by these pollutants. |
2295.00 |
View |
|
MatrixAir Super Slim
It is recommended that the Super Slim Air Cleaner be installed in areas that have 7 - 8 foot ceiling heights. The Super Slim Air Cleaner is equipped with 4 eye bolts installed 16" on center on top of each system for easy installation. The installation hardware also includes: 4 "S" hooks, 4 eye lags and industrial hanging wire.
Dimensions: 22" L x 24" W x 7" H
Electrical: .74 amps, 120 volts, Single Speed
7 ft power cord, 3 prong grounded plug
Filters: 1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
6" deep HEPA Filter
Weight: 45 lbs.
CFM: 200
Cabinet Finish: White, Woodgrain, Black
Installation: Ceiling or Wall mounted |
995.00 |
View |
|
MatrixAir 5.0 FM
MatrixAir 5.0 FM Air Cleaner is designed to drop into a suspended ceiling. It replaces either 1 - 2 x 4 tile or 2 - 2 x 2 tiles from the suspended ceiling. In order to install the 5.0 Flushmount easily the clearance above the suspended ceiling needs to be at least 8" and is recommended that the air cleaner is installed in areas that do not exceed a 10 foot ceiling height. The weight of the system does not rest on the ceiling grids but is secured above the suspended ceiling to a permanent structure such as a joist or beam. All filters on the 5.0 Flushmount are accessible from the intake grill on the face of the system.
Dimensions: 46 1/2" L x 23 3/4" W x 7" H
Electrical: .74 amps, 120 volts, Single Speed
7 ft power cord, 3 prong grounded plug
Filters: 1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
6" deep HEPA Filter
Weight: 45 lbs.
CFM: 200
Cabinet Finish: White (Custom color available)
Installation: Suspended ceiling |
1395.00 |
View |
|
MatrixAir FM22
The MatrixAir 22 FM is designed for a FlushMount installation in a solid ceiling with 24" on center joists. A 13" depth clearance is required above ceiling. After FM22 is secured to joists, a finished molding is recommended for appearance. It is recommended that the air cleaner is installed in areas that do not exceed a 12 foot ceiling height. All filters on the FM22 are accessible from the louvered doors on the face of the system. Model 16 Flushmount available for installation in a solid ceiling with 16" on center joists.
Dimensions: 46 1/2" L x 22" W x 12" H
Electrical: 4.2 amps, 120 volts, Two Speed
10 ft power cord, 3 prong grounded plug
Filters: 1/2" Polyester Tackified Pre Filter
1/2" Activated Carbon Filter
12" deep HEPA Filter
Weight: 85 lbs.
CFM: 1200
Cabinet Finish: White (Custom color available)
Installation: Solid ceiling with 24" on center joists |
2095.00 |
View |
|
Matrix Air Portable
Can be used 3 different ways:
On floor with castors.
On shelf.
On wall with hanger.
Advantages:
Our systems are portable. Simply plug into any a/c outlet. If you move simply unplug and take them with you.
Our systems have a 30 day money back policy. Energy consumption is minimal - 2.1 Amps
WARRANTY
Our systems carry a lifetime warranty. In the event of motor failing, switch breaking, grill breaking, etc. Warranty does not cover cabinet damage or filter usage. See filter replacement policy below for further information on our lifetime warranty and how it works.
FILTER REPLACEMENTS
Since 1983 each system we ship is recorded in our computers. We ship a year supply of filters with each system. Each year we will mail a card as a reminder to order your yearly kit. If you do not respond, we then call. If you still do not respond you stand to lose your lifetime warranty.
FILTERS
Perm and Nail Carbon Filter:
A special combination filter to remove ammonia (for perm) and methyl methacrylate (for nails) odor and chemicals as well as other existing foul by products found within the salon. Change every 6-12 months.
Dust, Hair, Particulate Filter:
The particulate filter is a tightly special tackified woven material to stop dust, hair, etc. This filter is replaced monthly.
12 FILTERS SUPPLIED WITH EACH SYSTEM. |
599.00 |
View |
|
Matrix Portable Flushmount
System fits in place of ceiling tile 1 - 2x4 or 2 - 2x2.
Advantages:
Our systems are portable. Simply plug into any a/c outlet. If you move simply unplug and take them with you.
Our systems have a 30 day money back policy. Energy consumption is minimal - 2.1 Amps
WARRANTY
Our systems carry a lifetime warranty. In the event of motor failing, switch breaking, grill breaking, etc. Warranty does not cover cabinet damage or filter usage. See filter replacement policy below for further information on our lifetime warranty and how it works.
FILTER REPLACEMENTS
Since 1983 each system we ship is recorded in our computers. We ship a year supply of filters with each system. Each year we will mail a card as a reminder to order your yearly kit. If you do not respond, we then call. If you still do not respond you stand to lose your lifetime warranty.
FILTERS
Perm and Nail Carbon Filter:
A special combination filter to remove ammonia (for perm) and methyl methacrylate (for nails) odor and chemicals as well as other existing foul by products found within the salon. Change every 6-12 months.
Dust, Hair, Particulate Filter:
The particulate filter is a tightly special tackified woven material to stop dust, hair, etc. This filter is replaced monthly.
12 FILTERS SUPPLIED WITH EACH SYSTEM. |
699.00 |
View |
|
|
|
|
